8. Press Connection Test.
When no connection is established, check the message that appears.
page 262 "When a Message Appears While Using the Scanner Function"
9. Press [OK].
10. Press the [User Management / Others] tab and specify the settings as required.
11. Press [OK].
12. Press [Home] ( ) after specifying the settings.
Basic Procedure for Performing Send to Folder
1. Press [Scanner] on the Home screen.
2. Select [To Folder] on the scanner screen.
3. Place the original on the scanner.
"Placing an Original to Scan", Scan
See "Placing an Original to Scan", User Guide (Full Version).
Scanning Documents and Sending the Scanned Data to a Folder
159
To Next Page
Loading...
Need help?
General
