When a Message Appears While Using the
Printer Function
• When confirming or changing the settings in [Settings], press [Home] ( ) after closing [Settings].
Messages that Appear without Error Codes
Message Cause Solution and reference
"Address Book is
currently in use by
another function.
Authentication has
failed."
The address book is
in use by another
function, and
authentication
query is not
possible.
Try again later.
"A job via the
network that was not
printed exists
because an error
occurred. It was
stored as a job not
printed."
When the error job
storing function is
enabled, an error
occurred in the print
job sent via the
network and the
canceled job was
stored.
• Check that the machine is connected to the
network correctly. For details about your network
environment, consult the network administrator.
• The stored document can be printed.
page 141 "Printing Documents Stored in the Printer
from the Control Panel"
"All the remaining
print volume has
been allocated to
another central
managed client(s).
The job has been
cancelled."
The job was
canceled because
the usage count
information could
not be obtained
from the Central
Management
machine.
All job slots are occupied by other devices. Check the
status of the client machine.
"An error occurred
while printing a job
with Background
Numbering. The job
has been
cancelled."
A size that is
impossible to print
was specified.
Specify a size smaller than 216.0 mm (8.5 inches) wide
and 356.0 mm (14.0 inches) long in "Print On:" in the
printer driver. When [Same as Original Size] is
specified in "Print On:", reduce the size specified in
"Print On:" or adjust the size in the application.
9. Troubleshooting
248
To Next Page
Loading...
Need help?
General
