• If the machine is not used for a specified period, the user is automatically logged out (Auto Logout).
The default setting for Auto Logout is 3 minutes. The period of Auto Logout can be changed by
[Auto Logout Timer] of [System Settings] or the Auto Logout setting can be disabled.
• See "Timer Settings", User Guide (Full Version).
• Ask the administrator for the login user name, login password, and user code.
Logging In by Entering the User Name and Password
Enter the authentication information using the keyboard displayed on the control panel.
1. Press [Login] at the top right on the screen.
2. Press [User Name].
3. Enter the login user name, and then press [Done].
4. Press [Password].
5. Enter the login password, and then press [Done].
6. Press [Login].
• If an incorrect password is entered a specified number of times, login with the same name is
disabled (Lockout Function). The default setting for unsuccessful attempts before a user is locked out
is five. If the user is locked out, the administrator must release the lockout.
Logging In from the Control Panel
63
To Next Page
Loading...
Need help?
General
