2. Load paper face up until it stops, and then adjust both sides of the paper guide to match
the paper width.
• When using the bypass tray, it is recommended that you set the paper direction to .
• Letterhead paper must be loaded in a specific orientation.
• page 200 "Loading Orientation-fixed Paper or Two-sided Paper"
• You can load envelopes into the bypass tray. Envelopes must be loaded in a specific orientation.
• page 198 "Envelope Orientation and Recommended Status"
Specifying Regular Sizes Using the Control Panel
1. Press [Settings] on the [Home] screen.
2. Press [Tray Paper Settings].
3. Press [Printer Bypass Paper Size].
4. Select the paper size.
5. Press [OK].
6. After completing the procedure, press [Home] ( ).
Loading Paper into the Paper Tray
187
To Next Page
Loading...
Need help?
General
