9. Troubleshooting
Alert Sounds
The machine notifies you with an alert sound when a paper jam occurs, the original is left on the
machine, or another problem occurs. Listen to the alert sound for one of the patterns described below,
and perform the required procedure accordingly.
Sound pattern
*1
Condition Solution
A short beep [Notification Sound] (operation
tone)
[Login]/[Logout]
-
A short beep, followed by
long beep
[Operation Invalid] • If you entered an incorrect
password, enter the correct
password.
• If you hear this sound when
touching an icon or key, you do
not have permission to use the
function or setting. Log in to the
machine as a user with
permission, or consult your user
administrator.
A long beep [Operation Completed]
[Fax Printing Finished]
[Fax Transmission Finished]
[Fax Reception Finished]
Check the operation result.
Two long beeps [Warm-up] The machine is ready for use after the
machine is turned on or recovers from
the sleep mode.
Five long beeps [Auto Reset] The machine has been reset to the
default state after the specified period
of time has passed with the machine
unoperated. If you were performing
and paused an operation, perform
the operation from the beginning
again.
217
To Next Page
Loading...
Need help?
General
