Replacing the Toner
Toner is almost depleted when the "Check you have a print cartridge replacement(s)." message is
displayed. Prepare a replacement print cartridge.
See "Checking Inquiry Information", User Guide (Full Version).
• Replace the toner after the message prompting replacement is displayed on the control panel.
• The machine may become damaged if you use toner of a different type.
• Do not turn off the power of the machine when replacing the toner. If you turn off the power when
replenishing the toner, the specified settings are canceled, and printing will not resume afterwards.
• Store the toner in a dry environment away from direct sunlight and generally under the temperature
below 35°C (95°F).
• Keep the toner horizontal when storing it.
• After removing the print cartridge from the machine, do not shake it while its opening is facing
downward. The remaining toner may spill out.
• Do not pull out and put back the print cartridge repeatedly. The remaining toner may leak.
• Follow the procedure displayed on the screen to replenish the toner.
Watching the Video for Replacing the Toner
See the video displayed on the control panel of the machine for the procedure to replace the toner.
1. Press [Watch Video].
To display this screen again, press [Check Status] and then press [Check] under "Mach. Status" on
the [Mach./Applic. Stat] tab.
2. Press the play key.
Replacing the Toner
203
To Next Page
Loading...
Need help?
General
