*2
If you place originals in the ADF and copy on orientation-fixed paper from the bypass tray without
specifying the paper size, the image might be copied upside down. In order to make copies
correctly, place the paper upside down or specify the paper size.
Printing onto Letterhead Paper Using the Printer Driver
Specify the settings of this machine as described below.
• [Printer Settings] [System] tab [Letterhead Setting] [Auto Detect]
Paper Orientation
Print Side
Tray 1
Paper Feed Unit
Bypass Tray
One-sided originals
Two-sided originals
• When you specify [Letterhead Setting] to [On (Always)], you can print onto letterhead paper
without specifying the paper type in the printer driver’s settings to [Letterhead].
• If a print job is changed partway through printing from one-sided to two-sided printing, one-sided
output after the first copy may be printed facing a different direction. To ensure all paper is output
facing the same direction, specify different input trays for one-sided and two-sided printing. Note
also that two-sided printing must be disabled for the tray specified for one-sided printing.
Loading Orientation-fixed Paper or Two-sided Paper
201
To Next Page
Loading...
