Copying Onto Envelopes
To copy onto envelopes that are not usually used, set them in the bypass tray. If you copy onto
envelopes frequently, set them in the paper tray.
Copying Onto Envelopes in the Bypass Tray
• The Duplex Copy function cannot be used for envelopes. If Duplex Copy is specified, press the key
to cancel the setting.
1. Press [Copy] on the Home screen.
2. Set the envelope in the bypass tray with the copying side face up.
page 198 "Envelope Orientation and Recommended Status"
The "Bypass Tray Paper Settings" screen is displayed.
3. Press [Change Setting].
4. Select [Envelope], and then proceed to the next screen.
To change the envelope weight, press [ChngThickness] to specify the weight.
Copying Onto Envelopes
87
To Next Page
Loading...
Need help?
General
