Names and Functions of the Control Panel
The touch panel (Smart Operation Panel) that displays the operation screen of the machine is referred to
as the "Control Panel".
• On the left side of the control panel, interfaces for connecting external devices and slots to insert an
SD card/USB flash memory device are provided.
• Even when the screen is turned off, the LED indicators on the frame of the control panel show the
status of the machine.
Touch Panel/Interface
1. Media slots
Insert an SD card or USB flash memory device. You can store the scanned data or print the file stored on the
media.
• Use an SD memory card or SDHC memory card with a maximum capacity of 32 GB. You cannot use an
SDXC memory card.
• Use the media formatted in FAT16 or FAT32.
• Certain types of USB flash memory devices cannot be used in the machine.
• A USB extension cable, hub, or card reader cannot be used.
• If the power of the machine is turned off or the media is removed from the machine while the machine is
reading the data in the media, check the data in the media.
• Before removing the media from the slot, press the icon displayed on the screen ( / ) to cancel the
connection.
Names and Functions of the Control Panel
19
To Next Page
Loading...
Need help?
General
