Model
Name
Power
Consumption
in Sleep
Mode
Power
Consumption
in Low Power
Mode
Time to
Recover from
Sleep Mode
Time to
Recover from
Low Power
Mode
Duplex
Function
*1
IM 550F 0.60 W 54.83 W 25 seconds 9 seconds Standard
IM 600F 0.60 W 54.83 W 25 seconds 9 seconds Standard
IM 600SRF 0.60 W 62.51 W 25 seconds 9 seconds Standard
*1
Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a
duplex tray and the duplex function is enabled as an option.
• You can change the amount of time that the machine waits before entering Sleep mode under
[Sleep Mode Timer].
• See "Timer Settings", User Guide (Full Version).
• It may take longer than the specified time to enter Sleep mode according to the type of Embedded
Software Architecture application installed in the machine.
User Information on Electrical and Electronic Equipment
(mainly
Europe)
Users in the countries where this symbol shown in this section has been specified in
national law on collection and treatment of E-waste
Our Products contain high quality components and are designed to facilitate recycling.
Our products or product packaging are marked with the symbol below.
The symbol indicates that the product must not be treated as municipal waste. It must be disposed of
separately via the appropriate return and collection systems available. By following these instructions
you ensure that this product is treated correctly and help to reduce potential impacts on the environment
and human health, which could otherwise result from inappropriate handling. Recycling of products
helps to conserve natural resources and protect the environment.
11. Legal and Contact Information
332
To Next Page
Loading...
Need help?
General
