To display the information about Toner remaining, specify [Display Time/Remaining Toner] to [Remaining
Toner] of [Screen Features Settings] [Screen Device Settings] [System Bar Settings (Top / Bottom of
Screen)].
14. [Check Status]
Press to check the following system statuses of the machine. This lights up in red when an error occurs.
• Machine’s status
Indicates the error status and network status.
• Operational status of each function
Status of functions such as Copy or Scanner
• Current jobs
• Job history
• Machine’s maintenance information
See "Checking the Machine Status from the Control Panel", User Guide (Full Version).
15. Icon display area
Displays the icons and widgets.
• You can change the screen displayed when the power is turned on under [Function Priority].
• See "Displaying Frequently Used Functions on the First Screen", User Guide (Full Version).
• When you press [Menu]
[Reset Home Screen] with the Embedded Software Architecture
application being installed in the machine, the application icons are not deleted.
Intuitive Screen Operation Using Fingertips
On the Home screen or application screen, you can perform the following operations by touching the
screen with your fingertips.
Flick (for switching between screens)
Touch and slide your finger on the screen quickly left or right to switch between the screens.
How to Use the Home Screen
41
To Next Page
Loading...
Need help?
General
