2. Copy
Basic Procedure for Copying Documents
Set the original on the exposure glass or in the Auto Document Feeder (ADF) to make a copy.
• If the previous setting is still active, press [Reset] before copying.
1. Press [Copy] on the Home screen.
2. Place the original.
See "Placing an Original on the Scanner", User Guide (Full Version).
3. On the Copy screen, press [Original Size].
If the key is not displayed, select it from [Original Setting].
4. Specify the original size.
The size of originals can be specified by the following three methods:
• Using the paper tray settings
When [Use Paper Tray Settings] is selected, the machine scans the originals based on the size
of the paper loaded in the selected tray.
• Selecting regular sizes
The user selects the size of the originals from the regular sizes.
• Specifying custom sizes
The user specifies both the horizontal and vertical size of the originals.
See "Copying a Custom Size Original", User Guide (Full Version).
5. Press [ ] or [ ] in [Quantity] to specify the number of copies.
75
To Next Page
Loading...
Need help?
General
