142142
Connecting a Computer via USB
Connecting to Your Computer
Connect the USB COMPUTER port to your computer to exchange
MIDI and audio data between devices.
MEMO
To use this instrument with the “VENDOR” setting, download and
install the necessary driver on your computer. See the Roland
website for details.
https://www.roland.com/global/support/
USB Driver Settings
Here’s how to specify the USB driver that’s used when connecting
to your computer.
1. Press the [MENU] button.
2. Touch <SYSTEM>.
3. Touch <GENERAL> tab.
4. Set the “USB Driver” parameter to “VENDOR”.
Parameter Value Explanation
USB Driver
VENDOR
Choose this if you want to use a
USB driver downloaded from the
Roland website.
GENERIC
Choose this if you want to use
the standard USB driver that was
included with your computer.
* Only MIDI is available.
5. Press the [WRITE] button to save the SYSTEM
settings.
6. Turn this unit’s power o, and then on again.
Performing Live with a Plug-in Synthesizer
You can use the FANTOM to play a plug-in synthesizer that’s
installed on your computer. In this case, you can route the audio
output of your plug-in synthesizer via USB audio into the FANTOM,
so that it is heard from the OUTPUT jacks of the FANTOM.
Performance data for
external zones
(USB MIDI)
Audio from the
computer (USB audio)
Performance using
Internal zones
Plug-in synthesizer installed on the
computer
Output
Using USB Audio
Adjusting the USB Audio Input
Here’s how to make settings for audio that’s input from a USB-
connected computer.
1. Press the [USB AUDIO SELECT] button.
2. Touch <SYSTEM>.
3. Touch <GENERAL> tab.
The SYSTEM screen’s USB tab appears
4. Move the cursor to “USB Audio Input Switch”, and
change the value to “ON”.
Audio input from the connected device turns on.
5. Use the cursor to select “USB Audio Input Volume”,
and adjust the input level.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
