4040
Playing Arpeggios
Using the Arpeggiator
The FANTOM has an arpeggiator that can automatically generate
arpeggios.
MEMO
Arpeggio settings are saved in the scene.
1. Press the [ZONE VIEW] button.
The ZONE VIEW screen appears.
Select the VIEW number as appropriate for the number of
zones you are using.
2. In the ZONE VIEW screen, turn ARP “ON” for the
zone that you want to arpeggiate.
NOTE
When the [ARPEGGIO] button is “ON”, arpeggios can be played in
zones whose ARP is “ON”.
1 ZONE VIEW 4 ZONE VIEW
16 ZONE VIEW8 ZONE VIEW
MEMO
You can turn ARP “ON” for multiple zones and make them play
arpeggios simultaneously.
3. Press the [ARPEGGIO] button to make it light.
The ARPEGGIO screen appears.
Menu Explanation
[E1] HOLD Holds the arpeggio.
[E6] EXIT Returns to the previous screen.
MEMO
By setting the system parameter “Arpeggio Switch Mode” (p. 165),
you can turn the arpeggiator on without accessing the ARPEGGIO
screen.
4. Play a chord on the keyboard.
An arpeggio is sounded by the zone that is turned on,
according to the notes of the chord that you play.
5. Move the cursor to “STYLE” and change the style.
The arpeggio performance changes according to the style
that you select.
6. To turn the arpeggiator o, press the [ARPEGGIO]
button once again to make it go dark.
MEMO
By using this together with the chord memory function, you can
easily play a variety of arpeggio sounds with a single nger (p.
43).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
