9999
Here’s how to edit a recorded pad sample. There are two types of
editing: “Quick Edit” and “Wave Edit”.
Using Quick Edit
Quick Edit lets you make basic settings for each pad sample.
1. Hold down the [SHIFT] button and press the
[SAMPLING] button.
The SAMPLE PAD screen appears.
2. Select [E2] QUICK EDIT.
The SAMPLE PAD (QUICK EDIT) screen appears.
3. Touch a <BANK> tab to select a bank.
4. Touch the parameters of each pad to edit their
values.
Parameter Value Explanation
GATE OFF, ON
Species whether the pad sample
stops playing when you release
the pad (ON) or continues playing
even after you release the pad
(OFF).
If this is ON, you can use the
[HOLD] button to hold the sound.
LOOP OFF, ON
Species whether the pad sample
plays as a loop (ON) or does not
play as a loop (OFF).
FX SW OFF, ON
Species whether eects are
applied to the pad sample (ON) or
not applied (OFF).
MEMO
Master FX can be applied to the
sample.
5. When you have nished editing, select [E2] QUICK
EDIT once again to return to the SAMPLE PAD
screen.
Using Wave Edit
Wave Edit lets you make detailed settings for each pad sample.
1. Hold down the [SHIFT] button and press the
[SAMPLING] button.
The SAMPLE PAD screen appears.
2. Touch a <BANK> tab to select a bank.
3. Touch the desired pad to select its pad sample.
4. Select [E1] WAVE EDIT.
The WAVE EDIT screen appears.
End point
Start point
Menu Explanation
SAMPLE Selects another pad sample.
[E1] START POINT Changes the start point.
[E2] END POINT Changes the end point.
[E3] ZOOM HORZ
Changes the display magnication of the
horizontal axis (the waveform’s time).
(1/65536–1/1)
[E4] ZOOM VERT
Changes the display magnication of the
vertical axis (the waveform’s amplitude)
(x1–x128)
[E5] LEVEL Changes the level.
[E6] PREVIEW
Auditions the sample while you continue
pressing the knob.
<SAMPLE UTILITY>
Accesses the SAMPLE UTILITY window
(p. 100).
Editing a Pad Sample
To Next Page
Loading...
Need help?
General
Weight and Dimensions
