Editing a Tone
6262
ZOOM EDIT (OVERDRIVE) screen
Tab
When using the [E1] knob to scroll and
select, the parameters to set are shown
on the right side.
Overdrive type
01: VK Overdrive
02: Tube Distortion
03: Guitar Amp Simulator
Knobs [E2]–[E6]
The parameters in this area are assigned.
Press or turn the knobs to edit a parameter.
ZOOM EDIT (ROTARY) screen
Tab
When using the [E1] knob to scroll and
select, the parameters to set are shown
on the right side.
Touch to switch
between parameters.
You can also use the
[
à
] and [
á
] cursor
buttons for this.
Knobs [E2]–[E6]
The parameters in this area are assigned.
Press or turn the knobs to edit a parameter.
ZOOM EDIT (MFX) screen
Tab
When using the [E1] knob to scroll and
select, the parameters to set are shown
on the right side.
Touch to switch
between parameters.
You can also use the
[
à
] and [
á
] cursor
buttons for this.
Knobs [E2]–[E6]
The parameters in this area are assigned.
Press or turn the knobs to edit a parameter.
SuperNATURAL Acoustic Piano Tone
(TONE TYPE: SN-AP)
For SuperNATURAL Acoustic Piano tones, you can select one
instrument and edit parameters that are specic to that instrument.
MFXMFX
InstInst
MEMO
To use the SN-AP tones, an SN-AP tone expansion must be installed
(p. 171).
The SN-AP expansion is pre-installed by factory default.
1. Select a tone whose TONE TYPE is “SN-AP”, and
then touch [MENU] button Ó <TONE EDIT>.
The TONE EDIT SN-AP screen appears.
Menu Explanation
[E1] Scrolls up or down through the tabs.
[E2] Scrolls the cursor up/down to select a parameter.
[E6] Edits the parameter selected by the cursor.
<UTILITY> Accesses the UTILITY window.
2. Move the cursor to the desired parameter and edit
the value.
Tab Explanation
COMMON Settings for the entire tone.
INST
Settings for the instrument and its corresponding
parameters.
MFX Settings related to multi-eects.
MFX
CONTROL
Settings for controlling MFX via MIDI.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
