7—Project and Drive Operations
112 www.Roland.com Roland VS-2000 Owner’s Manual
The VS-2000 asks if you’re sure you want to proceed with the recovery.
14. Press ENTER/YES to continue the recovery, or EXIT/NO to cancel.
15. If Erase All Projects is on, the VS-2000 asks if you’re sure you want to erase the
destination drive first—press ENTER/YES to do so, or EXIT/NO to cancel recovery.
16. If the backup is larger than a single disk, the VS-2000 asks for additional disks as
needed. Insert each requested disk in your drive and press ENTER/YES to proceed.
IMPORT
You can use project IMPORT to restore song backup and archive data from the:
• VS-880/880EX • VS-890 • VSR-880
• VS-1680 • VS-1880/1824/1824CD • VS-2400CD/2480/2480CD
When you import a song from an earlier V-Studio, the VS-2000 converts it into a
VS-2000 project. You can recover backed-up song data from a CD. After the
VS-2000 imports the song, it’s loaded as the current project. If you’re importing
multiple songs, the last song the VS-2000 imports becomes the current project..
Importing a Song from an Earlier V-Studio
1. Insert the CD containing the backed-up song data into your
CD-R/RW drive.
2. Hold down SHIFT and press F1.
3. Select the device containing the song data.
4. Press F6 (LIST). The VS-2000 displays:
5. Press ENTER/YES to change drives, or EXIT/NO to cancel the drive change.
6. Mark the song(s) you want to import.
7. Select the drive to which you want to import the song.
8. If “IMPORT” isn’t visible above F3, press PAGE until it is.
See “V-Studio Song/VS-2000 Project Compatibility” on Page 410 for details on how
other V-Studios’ songs are transformed into VS-2000 projects.
Tempo map is not importable.
You can’t import songs from the VS-1680 or VS-1880 by installing their internal hard
drives in the VS-2000. The VS-2000 utilizes a different type of drive format.
To import a VS-840 song, use the VS-840’s Song Convert operation to convert it first into
VS-880 format, and then import the song into the VS-2000. Only the song’s audio and
track assignments are imported—all other settings must be recreated manually.
PROJECT menu
F3 (IMPORT)
New drive’s
name
VS2000OMUS.book 112 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
Need help?
General
