Roland VS-2000 User Manual

11—Input and Track Channel Tools
Roland VS-2000 Owner’s Manual www.RolandUS.com 149
The CH EDIT Screens
The CH EDIT VIEW Screen
1. STATUS (track channel only)
The STATUS parameter mirrors the behavior of the TRACK/STATUS buttons
(Page 176). Changing a track’s recording or playback status in either place
changes it in both. You can set the parameter to:
• PLAY —The track channel’s TRACK/STATUS button lights green and any data
recorded on the track plays back when you press the PLAY button (Page 175).
• REC —The TRACK/STATUS button flashes red to show that the track is now armed
for recording. To learn how record, see “Recording a New Track” on Page 177.
• MUTE —The TRACK/STATUS light turns off and the track is silenced.
2. V.Trk (track channel only)
The V.Trk selector allows you to select one of the track’s 16 V-Tracks for recording
and/or playback. To learn about V-Tracks, see Page 95.
You can use this parameter to select the desired V-Track in either of two ways. In both
cases, you start by selecting the V.Trk parameter. Then, you can:
• turn the Time/Value dial to select the desired V-Track.
• press the flashing ENTER/YES button to view the V. Trk Pop-Up
window that graphically displays all 16 of the track’s V-Tracks. Each
V-Track appears as a line. If the line is thin, there’s no recorded data
on the V-Track—if it’s thick, there is. Turn the Time/Value dial to
select the desired V-Track and press ENTER/YES.
You can toggle back and forth between the CH EDIT VIEW screen and the last screen
you were on by repeatedly the channel’s INPUT button or TRACK/STATUS button.
You can hold down SHIFT as you turn the Time/Value dial to move through parameter
values in fine increments on the CH EDIT VIEW screen.
You can also select a track channel’s V-Track with a connected mouse using the Home
screen’s V-Track map. See Page 127.
3.
2.
1.
4.
5. 6. 7.
10.
8.
9.
11.
12.
13.
14. 15. 16.
17.
18. 19.
This illustration
shows a track
channel CH EDIT
VIEW screen. 1
and 2 are present
only in track
channels—with
input channels,
that area of the
screen is empty.
To learn about the
CH EDIT VIEW
screen’s CpyPRM
button, see
Page 166.
Data
No data
VS2000OMUS.book 149 ページ ２００４年１０月２０日 水曜日 午後３時３分

Roland VS-2000 Specifications

General

Brand	Roland
Model	VS-2000
Category	Musical Instrument
Language	English