SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 02/2012
41
Connecting
3
3.1 General Overview
Overview
The SIMOTION D4x5-2 has a number of interfaces that can be used for connecting the
power supply and for communication with the other components of the system. To make
these connections, the front cover of the SIMOTION D4x5-2 must be opened.
● The different SINAMICS components are interconnected via DRIVE-CLiQ.
● Actuators and sensors can be connected to the digital inputs/outputs.
● For communication purposes, the SIMOTION D4x5-2 can be connected to
PROFIBUS DP, PROFINET IO with IRT/RT, MPI and Ethernet.
To Next Page
Loading...
Need help?
General
