Construction
● On the linear actuator
Using mounting kit 6DR4004-8V and, where necessary, an
additional lever arm 6DR4004-8L on actuators according to
IEC 60534-6-1 (NAMUR) with a fin, columns, or a plane
surface.
● On the part-turn actuator
Using mounting kit 6DR4004-8D or TGX:16300-1556 on
actuators with mounting plane according to VDI/VDE 3845
and IEC 60534-6-2: The required mount must be provided
on the actuator-side.
Weight, positioner without option modules or accessories
● 6DR5..0 Glass-fiber reinforced polycarbonate enclosure
Approx. 0.9 kg (1.98 lb)
● 6DR5.11 aluminum enclosure, only single-acting
Approx. 1.3 kg (2.86 lb)
● 6DR5..2 stainless steel enclosure
Approx. 3.9 kg (8.6 lb)
● 6DR5..3 aluminum enclosure
Approx. 1.6 kg (3.53 lb)
● 6DR5..5 aluminum enclosure, flameproof, rugged
Approx. 5.2 kg (11.46 lb)
● 6DR5..6 stainless steel enclosure, flameproof, rugged
Approx. 8.4 kg (18.5 lb)
Material
● Enclosure
6DR5..0 polycarbonate Glass-fiber reinforced polycarbonate (PC)
6DR5.11 aluminum, only single-acting GD AISi12
6DR5..2 stainless steel Austenitic stainless steel 316Cb, mat. No. 1.4581
6DR5..3 aluminum GD AlSi12
6DR5..5 aluminum, flameproof, rugged GK AISi12
6DR5..6 stainless steel enclosure, flameproof, rugged Austenitic stainless steel 316L, mat. No. 1.4409
● Pressure gauge block
Aluminum AIMgSi, anodized or stainless steel 316
Versions
● In the polycarbonate enclosure 6DR5..0
Single-acting and double-acting
● In aluminum enclosure 6DR5.11
Single-acting
● In aluminum enclosures 6DR5..3 and 6DR5..5
Single-acting and double-acting
● In stainless steel enclosures 6DR5..2 and 6DR5..6
Single-acting and double-acting
Torques
● Part-turn actuator fixing screws DIN 933 M6x12-A2
5 Nm (3.7 ft lb)
● Linear actuator fixing screws DIN 933 M8x16-A2
12 Nm (8.9 ft lb)
● Gland pneumatic G¼
15 Nm (11.1 ft lb)
● Pneumatic gland 1/4-18 NPT
Without sealant 12 Nm (8.9 ft lb)
With sealant 6 Nm (4.4 ft lb)
● Cable glands
Screw-in torque for plastic gland in all enclosures 4 Nm (3 ft lb)
Screw-in torque for cable gland made of metal/stainless
steel in polycarbonate enclosure
6 Nm (4.4 ft lb)
Screw-in torque for metal/stainless steel glands in alumi‐
num/stainless steel enclosure
6 Nm (4.4 ft lb)
Technical data
12.3 Construction
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE 241
To Next Page
Loading...
Need help?
General
