Siemens SIPART PS2 series User Manual

System communication
Communication is via the HART protocol, using:
● HART Communicator (load 230 ... 1100 Ω)
● PC with HART modem, on which appropriate software is installed, e.g. SIMATIC PDM (load
230 ... 500 Ω)
● Control system which can communicate via the HART protocol, e.g. SIMATIC PCS7
SIMATIC PCS 7 Engineering Station
with SIMATIC PDM
S7-400
HART
PROFIBUS DP
Industrial Ethernet
ET 200M
Figure 3-11 Typical system configurations
3.4.4 SIMATIC PDM
SIMATIC PDM is a software package for configuring, parameter assignment, commissioning,
diagnostics and maintenance of this device and other process devices.
SIMATIC PDM offers simple monitoring of process values, alarms, and device status
information.
SIMATIC PDM allows the process device data to be:
● displayed
● set
● modified
● saved
● diagnosed
● checked for plausibility
● managed
● simulated
Additional information on SIMATIC PDM can be found at www.siemens.com/simatic-pdm
(www.siemens.com/simatic-pdm).
Description
3.4 Mode of operation
SIPART PS2 with 4 to 20 mA/HART
34 Operating Instructions, 11/2019, A5E00074631-AE

Siemens SIPART PS2 series Specifications

General

Brand	Siemens
Model	SIPART PS2 series
Category	Valve Positioners
Language	English