17MS 201, MS 201 C, MS 201 T, MS 201 TC
3.7 Engine
Always check and, if necessary,
repair the following parts before
looking for faults on the engine:
- Air filter
- Fuel system
- Carburetor
- Ignition system
Condition Cause Remedy
Engine does not start easily, stalls
at idle speed, but operates normally
at full throttle
Oil seals in engine damaged Replace the oil seals
Crankcase leaking or damaged
(cracks)
Inspect crankcase, re-seal or
replace if necessary.
Intake manifold damaged / bore
blocked
Clean bore or install new manifold
Engine does not deliver full power
or runs erratically
Piston rings worn or broken Install new piston rings
Muffler / spark arresting screen
carbonized
Clean the muffler (inlet and
exhaust), replace spark arresting
screen, replace muffler if necessary
Air filter dirty Clean or replace air filter
Fuel hose kinked or cracked Fit new hose or position it free from
kinks
Intake manifold damaged / bore
blocked
Clean bore or install new manifold
Engine overheating Insufficient cylinder cooling. Air
inlets in fan housing blocked or
cooling fins on cylinder very dirty
Thoroughly clean all cooling air
openings and the cylinder fins
Air inlet in fan housing dirty Clean air inlet on fan housing