8 MS 201, MS 201 C, MS 201 T, MS 201 TC
3. Troubleshooting
3.1 Clutch
Condition Cause Remedy
Saw chain stops under full load Clutch shoes badly worn Install new clutch
Clutch drum badly worn Install new clutch drum
Saw chain rotates at idle speed Engine idle speed too high Readjust idle speed screw LA
Clutch springs stretched Replace the clutch springs or install
new clutch
Clutch springs broken Replace the clutch springs
Loud noises Clutch springs stretched Replace all clutch springs
Clutch shoe retainer broken Install new retainer or clutch
Clutch shoes and carrier worn Install new clutch
Needle cage damaged Fit new needle cage
To Next Page
Loading...
Need help?
General
