2-14. SPEEDOMETER
I
Condition
I
Possible cause
I
Correction
Faulty indication
1. Damaged speedometer drive or driven gear
2. Defective drive cable
3. Drive cable incompletely or imporperly
tied into the meter
4. Defective speedometer
Replace
Replace
Set right
Replace
Speedometer noise
1. Inadequately lubricated or defective cable
2. Not enough oil in transfer
Lubricate or replace
Replenish
2-15. WATER TEMPERATURE METER
Condition
Faulty indication
No indication
Possible cause
1. Incomplete metal-to-metal contact in
terminal connections
2. Receiver gauge defective (due to burnt
point or deformed bimetal element)
3. Defective temperature gauge
1. Open-circuit
2. Defective receiver gauge (open-circuited
heat wire, deformed bimetal element or
pointer)
Repair
Replace
3. Defective temperature gauge
Replace
Correction
Repair and tighten
Replace
Replace
2-19