Tektronix MSO54B Printable Help

Timing Measurements panel
Use the Timing Measurements panel to add timing-related measurements to the Results bar. Timing measurements can be
taken on time-domain analog, math, and reference waveforms. Timing measurements can also be taken on some digital channel
signals.
To open the Timing Measurements panel:
1. Tap the Add New... Measure button.
2. Tap the Timing Measurements panel.
To add a measurement to the Results bar:
1. Select the signal source.
2. Select a measurement. If a measurement requires two signal sources, select the sources in the Source 1 and Source
2 fields.
3. Tap Add. You can also double-tap a measurement to add it immediately to the Results bar.
Menus and dialog boxes
154 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Tektronix MSO54B Specifications

General

Brand	Tektronix
Model	MSO54B
Category	Test Equipment
Language	English