Audio serial bus trigger settings panel
NOTE. Requires option SRAUDIO.
Field or control Description
Source Select the Audio bus on which to trigger.
Trigger On Select the type of information on which to trigger.
Data Sets the data pattern on which to trigger. Use in conjunction with the Trigger When field to
specify the exact trigger condition.
Tap the Binary, Hex, or Decimal field and use the A and B knobs to select and change the
values. Or double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Data.
Word Sets the audio word channel on which to trigger (Either, Left, Right).
Available when Trigger On = Data.
Trigger When Sets the trigger when condition for the specified data pattern.
When set to Inside Range or Outside Range, fields are displayed to set a high and low
boundary pattern for the specified trigger type.
Tap the Binary, Hex, or Decimal field and use the A and B knobs to select and change the
values. Or double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Data.
A, B knob controls Use the A knob to select (highlight) the digit(s) to change.
Use the B knob to change the value of the digit(s).
Menus and dialog boxes
346 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
To Next Page
Loading...
Need help?
General
