Tektronix MSO54B Printable Help

Other trigger types.
■
Bus Trigger Menu
■
Edge Trigger menu
■
Logic Trigger menu
■
Pulse Width Trigger menu
■
Rise Fall Time Trigger menu
■
Runt Trigger menu
■
Sequence Trigger menu
■
Timeout Trigger menu
■
Window Trigger menu
Setup and Hold Trigger - Define Inputs configuration menu
Use this menu to set the input signals and their threshold levels for the Setup & Hold trigger.
To open the Setup & Hold Trigger - Define Inputs dialog:
1. Double-tap the Trigger Badge.
2. Set the Trigger Type to Setup & Hold.
3. Tap the Data Sources Define Inputs button.
Setup & Hold Trigger - Define Inputs configuration menu fields and controls.
Field or control Description
Chx (analog channels) or Dx
(digital channels)
Use to select the signal sources to test for the setup and hold condition. Tap to select for each
input source.
If a channel is a digital channel, tap the + symbol to open the list of digital inputs (D0-D7) from
which to select individual digital signals.
Use the Threshold field to set the signal level that must be exceeded for that signal to be true.
Set All Sets all signal sources to be included or not included.
Timeout Trigger configuration menu
Use the Timeout Trigger to trigger on a waveform when an expected signal does not transition within a specified period of time,
such as when a signal gets stuck either high or low.
To open the Timeout trigger menu:
1. Double-tap the Trigger badge on the Settings bar.
2. Set the Trigger Type to Timeout.
Menus and dialog boxes
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help 397

Tektronix MSO54B Specifications

General

Brand	Tektronix
Model	MSO54B
Category	Test Equipment
Language	English