Tektronix MSO54B Printable Help

Field or control Description
Decode Format Sets the decode format used to display the bus information. Formats are Hex, Binary, and
Mixed Hex.
Other bus types. Other serial bus types, such as RS232, LIN, I2C, FlexRay, and so on, are available as purchasable options.
Once purchased and installed, the new bus types are shown in the Bus Type menu. The serial bus options also add
corresponding bus trigger capabilities to the Trigger menu.
ARINC 429 serial bus menu on page 192
Audio serial bus configuration menu on page 194
Ethernet serial bus menu on page 198
FlexRay serial bus configuration menu on page 200
I2C serial bus configuration menu on page 202
LIN serial bus configuration menu on page 204
MIL-STD-1553 serial bus menu on page 205
Parallel Bus configuration menu on page 207
RS232 serial bus menu on page 209
SENT serial bus configuration menu on page 211
SPI serial bus configuration menu on page 213
SPMI serial bus configuration menu on page 215
USB serial bus configuration menu on page 217
See also.
Bus Trigger configuration on page 342
Bus Search configuration menus on page 230
Ethernet serial bus menu
Use the Ethernet bus menu (optional) to set up and display an Ethernet 10BaseT or 100BaseT serial bus waveform.
To use the Ethernet serial bus menu:
■
To create a new Ethernet bus waveform, tap the Add New Bus button on the Settings bar. Open the bus configuration
menu by double clicking on the badge. Set the Bus Type to Ethernet.
■
To change the settings on an existing Ethernet serial bus waveform, double-tap the Ethernet Bus waveform badge to open
the configuration menu.
Menus and dialog boxes
198 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Tektronix MSO54B Specifications

General

Brand	Tektronix
Model	MSO54B
Category	Test Equipment
Language	English