© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 1
1
1. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1.1 Specifications
• Copy process Indirect electrophotographic process (dry)
• Type Desktop type (console type: when paper feed pedestal (PFP) and large
capacity feeder (LCF) are installed)
• Original table Fixed type (the left rear corner used as guide to place originals)
• Accepted originals Sheet, book and 3-dimensional object. The reversing automatic document
feeder (RADF) only accepts paper which are not pasted or stapled.
Carbon paper are not acceptable either.
Maximum size: A3/LD
• Copy speed (Copies/min.)
e-STUDIO350/352/353
e-STUDIO450/452/453
* “–” means “Not acceptable”.
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
* When the RADF is used, the copy speed of 35[45] sheets per minute is only available under the fol-
lowing conditions:
• Original/Mode: Single side original/A4/LT size. APS/automatic density are not selected.
• Number of sheets: 35[45] or more.
• Paper feeding: LCF
• Reproduction ratio: 100%
Values in [ ] are for e-STUDIO450/452/453 in case that the specification is different between e-STUDIO350/
352/353 and e-STUDIO450/452/453.
Single - sided originals Double - sided originals
MR-3015
50 to 127 g/m
2
(13 lb. Bond to 34 lb. Bond)
50 to 105 g/m
2
(13 lb. Bond to 28 lb. Bond)
MR-3018
35 to 157 g/m
2
(9.3 lb. Bond to 58 lb. Cover)
50 to 157 g/m
2
(13 lb. Bond to 58 lb. Cover)
Paper size
Paper supply
Drawer
Bypass feed
PFP LCF
Size specified
Size not
specified
A4, LT, B5 35 35 18 35 35
A4-R, B5-R, A5-R,
LT-R, ST-R
25 25 18 25 -
B4, LG 21 21 18 21 -
A3, LD 18 18 18 18 -
Paper size
Paper supply
Drawer
Bypass feed
PFP LCF
Size specified
Size not
specified
A4, LT, B5 45 40 21 45 45
A4-R, B5-R, A5-R,
LT-R, ST-R
28 28 21 28 -
B4, LG 24 24 21 24 -
A3, LD 21 21 21 21 -
07/11
To Next Page
Loading...
Need help?
General
