Toshiba e-STUDIO350 User Manual

e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 66
3.10.9 Adjustment of RADF opening/closing sensor
Adjust the bracket position so that the sensor is turned ON when the height A becomes 30-35 mm
(within the empty weight falling limit).
Fig. 3-81
Glass surface
A
Center

Toshiba e-STUDIO350 Specifications

General

Brand	Toshiba
Model	e-STUDIO350
Category	All in One Printer
Language	English