© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 13
2
2.1.3 Error in Internet FAX / Scanning Function
1) Internet FAX related error
(When GM-1010/3010, GM-2010, GM-1060/4060, GM-2060, GM-1061/4060, GM-2061, GM-1120/
4120, or GM-2120 is installed)
Error code Classification Troubleshooting
1C10 System access abnormality P. 5-94
1C11 Insufficient memory P. 5-94
1C12 Message reception error P. 5-94
1C13 Message transmission error P. 5-94
1C14 Invalid parameter P. 5-94
1C15 Exceeding file capacity P. 5-94
1C20 System management module access abnormality P. 5-94
1C21 Job control module access abnormality P. 5-94
1C22 Job control module access abnormality P. 5-94
1C30 Directory creation failure P. 5-95
1C31 File creation failure P. 5-95
1C32 File deletion failure P. 5-94
1C33 File access failure P. 5-95
1C40 Image conversion abnormality P. 5-95
1C60 HDD full failure during processing P. 5-95
1C61 Address Book reading failure P. 5-95
1C62 Memory acquiring failure P. 5-95
1C63 Terminal IP address unset P. 5-95
1C64 Terminal mail address unset P. 5-95
1C65 SMTP address unset P. 5-95
1C66 Server time time-out error P. 5-95
1C67 NIC time time-out error P. 5-95
1C68 NIC access error P. 5-95
1C69 SMTP server connection error P. 5-96
1C6A HOST NAME error P. 5-96
1C6B Terminal mail address error P. 5-96
1C6C Destination mail address error P. 5-96
1C6D System error P. 5-95
1C70 SMTP client OFF P. 5-96
1C71 SMTP authentication error P. 5-96
1C72 POP before SMTP error P. 5-96
1C80 Internet FAX transmission failure when processing E-mail job received P. 5-96
1C81 Onramp Gateway transmission failure P. 5-96
1C82 Internet FAX transmission failure when processing FAX job received P. 5-96
1CC0 Job canceling -
1CC1 Power failure P. 5-96
07/11