Triumph Rocket III Service Manual

Radiator
Removal
Before starting work, ensure the motorcycle is
stabilised and adequately supported. This will help
prevent it from falling and causing injury to the
operator or damage to the motorcycle.
1. Remove the rider's seat.
2. Disconnect the battery, negative (black) lead first.
Cooling
1. Bottom radiator hose
2. Water pump outlet hose
3. Water pump
6. Remove both radiator side covers.
Do not remove the coolant pressure cap when the
engine
is hot. When the engine is hot, the coolant
inside the radiator is hot and also under pressure.
Contact with hot coolant will cause scalds and skin
damage.
3. Drain the coolant as described on page 12.6.
4. Disconnect the top hose and bypass hose from
the thermostat housing and head respectively.
~
1
I
1. Top hose
2. Bypass hose
5. Disconnect the water pump hoses at the radiator.
~I
1. Side cover fixings
7. Remove the lower radiator cover.
1. Lower cover fixing (left hand shown)
1
Service Manual- Rocket III
12.11

Triumph Rocket III Specifications

General

Brand	Triumph
Model	Rocket III
Category	Motorcycle
Language	English