Common Settings
279
System Settings
10
Maintenance
You can initialize the hard disk or delete data recorded in the machine.
Initialize Hard Disk
Initializes the hard disk.
Data deleted by initialization includes supplementary fonts and HP-GL/2 form.
Note • Some of the items do not appear for some models.
• The secure print documents and logs are not erased.
Delete All Data
This feature is used to prevent the leakage of customer’s confidential information when the
machine is returned to Fuji Xerox. By executing [Start], all data registered in the machine is
deleted.
Do not use this function.
Software Options
This feature is for customer engineer use. For more information, contact our Customer
Support Center.
Other Settings
You can make other settings relating to the machine itself.
Fax Service
Switches between the Fax and Server Fax features.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• The Fax and Server Fax features cannot be enabled at the same time.
îš„Scan to Fax
Allows you to use the Fax feature on the machine.
îš„Scan to Fax Server
Allows you to use the Server Fax feature on the machine.
Offset Stacking (Center Output Tray)
Offsetting means that each set (copies) or job is delivered at a slightly shifted paper output
position from that of the previous one. If the previous copy set is output to a forward position
on the tray, the next copy set is output to a backward position on the tray. Set the operation of
this offset feature.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
îš„None
No offset output.
îš„Offset per set
Offset the output position for each set of copies.
îš„Offset per job
Offset the output position for each job being specified.
To Next Page
Loading...
Need help?
General
