3 Copy
86
Copy
3
• When Image Shift is set, shift is executed on the whole document. For this reason, image
loss at the edge of the original may occur depending on the size of the document image.
• When Edge Erase is set, it is carried out for each document page.
• Select an item other than [Auto Paper] for the paper tray of [Paper Supply] on the [Copy]
screen.
1
Select [Multiple-Up].
2
Select any item.
îš„1 Page Up
Disables this feature.
îš„2 Pages Up
Copies two document pages onto one side of a single sheet of paper.
îš„4 Pages Up
Copies four document pages onto one side of a single sheet of paper.
îš„8 Pages Up
Copies eight document pages onto one side of a single sheet of paper.
îš„Reading Order
Allows you to select how to lay out images on a page.
Poster (Making Enlarged Copies Spread over Multiple Sheets)
An enlarged copy of a document can be made spread over multiple sheets.
This feature allows you to create a large poster by pasting together the copies spread
over multiple sheets. Copied sheets are provided with a paste margin so that they can
be pasted together. The paste margin is fixed to 10 mm.
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
[Layout Adjustment] screen are the same.
1
Select [Poster].
2
Select any item.
îš„No Posters
No enlarged copies are made.
îš„Output Size
You can select from 7 paper sizes.
îš„Enlargement %
Refer to "When [Enlargement %] is Selected" (P.87).
To Next Page
Loading...
Need help?
General
