Machine Status
369
Machine Status
12
Overwrite Hard Disk
You can check the overwriting status of the hard disk. The indication "Overwriting"
shows that the overwriting is in progress. "Standby" shows the completion of the
overwriting process.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• [Overwrite Hard Disk] appears only when [Overwrite Hard Disk] is enabled in [System
Settings]. For more information, refer to "Overwrite Hard Disk" (P.283).
1
Select [Overwrite Hard Disk].
Print Mode
You can change and register the print mode settings.
Note • The items displayed vary depending on the options installed.
1
Select [Print Mode].
2
Select [Off-line] or [On-line].
îš„Off-line
The printer cannot accept data. Any data being sent is cancelled and not printed.
îš„On-line
The printer can accept data.
3
Select a printer language.
4
Select the item to be set.
Retrieve Programming
You can retrieve and use settings registered in the memory.
1
Select [Retrieve Programming].
2
Select the memory number to be
used.
îš„Factory Defaults
You can use the factory default settings.
îš„Custom Settings
The numbers stored in the memory appear.
To Next Page
Loading...
Need help?
General
