Machine Status
371
Machine Status
12
Default Programming
You can start the printer using the settings stored in the memory as default settings.
1
Select [Default Programming].
2
Select [Factory Defaults] or
[Custom Settings].
3
When you select [Custom
Settings], select the memory
number to be used.
îš„Factory Defaults
You can use the factory default settings.
îš„Custom Settings
The numbers stored in the memory appear.
Password
For PDF emulation, if a password is set for PDF files, set the password here in
advance. PDF files can be printed only when their password matches the password set
here.
You can use up to 32 characters for the password.
1
Press [Password].
2
Select [Keyboard].
3
Enter a password (within 32
characters) in [New Password /
Passcode], and select [Set].
4
In [Re-enter Password / Passcode], enter the same password, and select [Save].
Fax Receiving Mode
You can set a fax receiving mode.
For information on automatic and manual fax receiving modes, refer to "Receiving Faxes" (P.167).
1
Select [Fax Receiving Mode].
2
Select a fax receiving mode.
îš„Manual Receive
Allows you to manually receive a fax from a remote machine. This mode is convenient
when you want to confirm the sender or use an external telephone for a telephone call
before fax reception.
îš„Auto Receive
Automatically starts receiving a fax from a remote machine.
To Next Page
Loading...
Need help?
General
