Xerox ApeosPort-II 5010 User Manual

16 Appendix
562
Appendix
16
PDF Direct Print
PDF Direct Print is a feature that prints PDF files by directly using the lpr command
instead of a print driver. When this feature is used, the following items will be printed
based on the settings on the control panel.
Note • When using the lpr command to print, specify the number of copies to be printed in the lpr
command. The copy quantity setting made on the control panel becomes invalid. If the copy
quantity is not specified in the lpr command, only one copy is printed.
• When printing a PDF file using the lpr command, the LPD protocol of the machine must be
started using the control panel or CentreWare Internet Services.
PDF Direct Print Settings
This section explains the setting items for the PDF Direct Print feature.
The settings configured here are valid when printing PDF files without using
"ContentsBridge" provided by Fuji Xerox.
Note • For information on printing PDF files using ContentsBridge Utility, refer to the manual
provided on the driver CD kit CD-ROM.
z
Output Quantity
z
Layout
z
2 Sided Printing
z
Paper Size
z
Print Mode
z
Print Processing Mode
z
Collate
Setting Item
Item
Number
Value
Output Quantity 401 Sets the number of copies to be printed.
[1-999] (Default: 1): 1-999 sheets
2 Sided Printing 402 Sets the 2-sided printing option.
[0] (Default) : 1 Sided
[1] : 2 Sided (Flip on long edge)
[2] : 2 Sided (Flip on short edge)
[2 Sided (Flip on long edge)] prints 2-sided in the orientation so that
pages can be bound along the long edge.
[2 Sided (Flip on short edge)] prints 2-sided in the orientation so that
pages can be bound along the short edge.
Note • This feature does not appear for some models. An optional package
is necessary. For more information, contact our Customer Support
Center.
Print Mode 403 Sets whether to give priority to the print speed or the image quality.
[0] (Default) : Standard
[1] : High Speed
[2] : Fine
The [Standard] setting prints in a standard speed and quality.
The [High Speed] setting gives priority to the print speed.
The [Fine] quality setting prints in high quality but in a slower speed.
Collate 404 Sets whether to print multiple-sheet documents as collated sets (1, 2,
3...1, 2, 3...).
[0] (Default) : Off
[1] : On

Xerox ApeosPort-II 5010 Specifications

General

Brand	Xerox
Model	ApeosPort-II 5010
Category	All in One Printer
Language	English