Fax Mode Settings
313
System Settings
10
îš„A/B Series Size
Select from 10 sizes of A and B series.
îš„Inch Size
Select from 12 sizes of inch series.
îš„Others
Select from other 13 sizes.
Local Terminal Information
You can set the local terminal information, including a local name and sender name.
For information about how to enter characters, refer to "Entering Text" (P.266).
Note • The displayed items may be different, depending on the options installed.
• There are a maximum of three lines that can be used for G3 communications: line 1, line 2,
and line 4.
• For each line, you can set a G3 ID (fax number), G3 dialing type, and G3 line type.
Local Name
Register the name of the local terminal as the local name.
The local name is shown in the recipient's [Activity Report]. However, depending on the
recipient's device, it may not be shown.
Using the displayed keyboard and the numeric keypad, make the specification with not more
than 20 characters.
Company Logo
Register a sender’s name. The sender name is the name of the local terminal as printed in
the send headers and on cover notes.
Using the displayed keyboard and the numeric keypad, make the specification with not more
than 30 characters.
Machine Password
Set the machine password when you want to limit the other parties that can send faxes.
When the machine password is set, only a party that sends the correct machine password by
F code is allowed to send or poll. Note that this means that faxes cannot be accepted from a
fax without the F code feature.
G3 Line 1, 2, 4 - Fax ID
When using G3 communications, register the G3 ID. The G3 ID is normally set to the local
terminal fax number.
Using the displayed keyboard and the numeric keypad, specify with not more than 20 digits.
Note • A G3 ID (fax number) consists of not more than 20 digits, including 0 to 9, +, and space.
G3 Line 1, 2, 4 - Dial Type
Set the dial type.
îš„Tone
Tone dialing line.
îš„10pps
Pulse dialing line.
To Next Page
Loading...
Need help?
General
