Application Deployment
148
• usb_driver
• Directory containing the necessary drivers to connect the development environment to an enabled
device. These files are only required for developers using the Windows platform.
Open the Developer options screen to set development related settings.
By default, the Developer Options are hidden. To un-hide the developer options, Swipe down from the status bar to
open the quick access panel and then touch > About device. Scroll down to Build number. Tap Build
number seven times until You are now a developer appears.
Touch and then touch Developer options. Slide the switch to the ON position to enable developer options.
ADB USB Setup
ADB driver for Windows and Linux are available on the Zebra Support Central web site at www.zebra.com/support.
Download the ADB and USB Driver Setup package. Following the instructions with the package to install the ADB
and USB drivers for Windows and Linux.
Application Installation
After an application is developed, install the application onto the device using one of the following methods:
• USB connection, see Installing Applications Using the USB Connection on page 148.
• Android Debug Bridge, see Installing Applications Using the Android Debug Bridge on page 149.
• Mobile device management (MDM) platforms that have application provisioning. Refer to the MDM
software documentation for details.
Installing Applications Using the USB Connection
1. Connect the device to a host computer using USB. See USB Communication.
2. On the host computer, copy the application .apk file from the host computer to the device.
3. Disconnect the device from the host computer. See USB Communication.
4. Swipe down from the status bar to open the quick access panel and then touch .
5. Touch Security.
6. Slide the Unknown sources switch to the ON position.
7. Touch OK.
8. Touch .
9. Swipe the screen up and select to view files on the Internal Storage.
10. Locate the application .apk file.
CAUTION:When connecting the device to a host computer and mounting its microSD card, follow the host
computer’s instructions for connecting and disconnecting USB devices, to avoid damaging or
corrupting files.
NOTE: In File Browser, Internal storage path is /storage/sdcard0 or /sdcard.
To Next Page
Loading...
Need help?
General
