Accessories
37
Figure 26 Insert WT6000 into Cradle
2. If charging a WT6000 with a extended battery, insert the end of the WT6000 into the WT6000 charging slot as
shown below.
Figure 27 Insert WT6000 with Extended Battery into Cradle
3. Ensure that the WT6000 is properly seated in the charging slot.
Battery Charging
The WT6000 Charging LED indicates the status of the battery charging in the device. See Table 5 on page 26. The
standard 3,350 mAh battery fully charges in less than four hours at room temperature. The extended 5,000 mAh
battery fully charges in approximately five hours and 30 minutes at room temperature.
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The battery charger always performs battery
charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37°C (+98°F)) the battery
charger may for small periods of time alternately enable and disable battery charging to keep the battery at
acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures
via its LED.
To Next Page
Loading...
Need help?
General
