Zebra ZM400 Series User Manual

337
Corrective Maintenance
Peel Rewind Option
8/9/07 ZM400/ZM600 Maintenance Manual 14207L-001 A
Peel Rewind Option
Tools Required
Remove the Electronics Cover
1.
2.
Tools • You need these tools to complete this procedure:
 Phillips Screwdriver Set
 Antistatic Mat and Wrist Strap
 Metric Nutdriver Set
Note • Retain all parts removed during disassembly, unless otherwise directed.
Caution • Turn off (O) the printer and disconnect it from the power source before
performing the following procedure.
Turn off (O) the printer and disconnect the AC power cord and all data cables.
Caution • While performing any tasks near an open printhead, remove all rings,
watches, hanging necklaces, identification badges, or other metallic objects that could
touch the printhead.
Open the media door and remove the media and ribbon.

Zebra ZM400 Series Specifications

General

Brand	Zebra
Model	ZM400 Series
Category	Label Maker
Language	English