ABB SACE Emax E2.2 User Manual

ABB | SACE Emax 2
Electronic accessories | 2 - Ekip Supply modules177 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
2 - Ekip Supply modules
Description
Ekip Supply is a power supply accessory module.
There are two types, depending on the input voltages:
• Ekip Supply 24-48Vdc.
• Ekip Supply 110-240Vac/dc.
It performs three functions:
• Supply insulated 24 V DC auxiliary power to the trip unit.
• Supply 24 V DC non-insulated power to the electronic accessories mounted on the terminal box.
• Act as a bridge for the Local Bus, between the trip unit and the electronic accessories mounted on the
terminal box.
Compatibility
The modules can be installed combined with Ekip Dip, Ekip Touch, Ekip Hi‐Touch, Ekip G Touch, and Ekip G
Hi‐Touch trip units.
Electrical characteristics
The following table lists the electrical characteristics of the modules:
Module
Power supply
voltages
Frequency Power input Inrush current
Ekip Supply
24-48Vdc
21.5…53 V DC - Maximum 10W Maximum 2 A for 20 ms
Ekip Supply
110-240Vac/dc
105…265 V AC/DC 45…66 Hz Maximum 10 VA/W Maximum 2 A for 20 ms

ABB SACE Emax E2.2 Specifications

General

Brand	ABB
Model	SACE Emax E2.2
Category	Circuit breakers
Language	English