•
Remove the washers (3) in corre-
spondence with the stud bolts.
•
Remove the head (4).
•
Remove the gasket (4).
Cylinder head
Removing the overhead camshaft
To proceed with the removal of the camshafts it is
necessary to rotate the crankshaft so that the
valves are not under tension and after removing
the head cover, proceed as described:
•
Remove the twelve fixing screws (1) of
the cam tower (2) and the support plate
(3) of the fixed chain slider.
RS 660 - Tuono 660 Engine
ENG - 195