•
Having positioned the fixing screw (4)
of the front sprocket, along with the "T"
bush (5) and the spring washer (6),
tighten it to the prescribed torque.
•
Position the breather pipe (7) in the
sprocket cover (8) as indicated.
•
After positioning the sprocket cover
(8), insert the three screws (9) com-
plete with "T" bushes (10) and tighten
them to the prescribed torque.
•
Restore the drive chain to the correct tension, following the specific procedure described in
the "Adjustment" paragraph.
Drive chain
RS 660 - Tuono 660 Chassis
CHAS - 307
To Next Page
Loading...
Need help?
General
