Engine oil filter
Replace the engine oil filter each time you
change the engine oil.
•
Drain the engine oil completely.
•
Unscrew and remove the engine oil fil-
ter from its seat.
NOTE
NEVER REUSE AN OLD FILTER.
•
Spread a thin layer of oil on the sealing ring of the new engine oil filter.
•
Insert and screw the new engine oil filter in the seat, filling the filter to 1/3 of its capacity with
engine oil before fitting.
See also
Replacement
Air filter
•
Remove the fuel tank.
•
Disconnect the intake air temperature
sensor connector.
•
Remove the eleven filter box lid fastening screws.
RS 660 - Tuono 660 Maintenance
MAIN - 61
To Next Page
Loading...
Need help?
General
