•
While supporting the tail light unit, re-
move the upper screw (3).
•
Before proceeding with the removal and releasing the wiring harness, check its correct po-
sitioning which must be restored during the refitting phase.
•
Remove the rear light assembly (4).
License plate light
To remove the license plate light, proceed as fol-
lows:
•
Unscrew the screw (1) and remove the
closure (2) of the license plate holder.
•
Disconnect the license plate light con-
nector (3).
Bodywork RS 660 - Tuono 660
BODYW - 394
To Next Page
Loading...
Need help?
General
