Setting Transmission Functions
5-31
Setting and Storing Custom Fax Settings
5
NOTE
•
To cancel the setting procedure, press “Cancel.”
3
Press “Done.”
The specified mode is set.
Press “Done” repeatedly until the Fax Basic Features screen appears.
Setting Auto Redial
Auto Redial is a function that automatically dials the other party again if the other party
cannot be dialed due to a busy line, for example, or if a sending error occurs.
If you set Auto Redial, you can set redial times, redial interval, and transmission error redial.
NOTE
•
The default settings are:
-Auto Redial: On
- Redial Times: 2 times
- Redial Interval: 2 minutes
-Transmission Error Redial: Error and 1st page.
1
Call up the desired screen as follows:
2
Press “On.”
To cancel Auto Redial, press “Off” → press “OK” → proceed to step 5.
NOTE
•
To cancel the setting procedure, press “Cancel.”
(Additional
Functions)
Auto Redial
Index.book Page 31 Thursday, May 24, 2001 12:30 AM
To Next Page
Loading...
Need help?
General
