Setting Reception Functions
5-35
Setting and Storing Custom Fax Settings
5
Setting Reception Functions
You can set various functions for receiving a fax.
Specifying Whether or Not to Use ECM for Received
Documents
You can receive incoming documents using the Error Correction Mode (ECM).
The ECM is a function which automatically corrects errors in an image while it is being
received.
IMPORTANT
•
If you want to communicate using the ECM, it is necessary that the ECM function be set in both the
other party’s machine and this machine. (Unless the ECM is set in both machines, this function will
not operate).
•
Even when you specify the ECM function, errors can sometimes occur due to a poor telephone line.
•
If trouble occurs in the telephone line, it will take some time for the documents to be received.
NOTE
•
The default setting is “On.”
1
Call up the desired screen as follows:
(Additional
Functions)
ECM RX
Index.book Page 35 Thursday, May 24, 2001 12:30 AM
To Next Page
Loading...
Need help?
General
