When Problems Occur
8-5
Troubleshooting
8
The machine will not receive to a memory box.
Q. : Did the other party send to a stored memory box?
A. : Check the set subaddress and RX password, and contact the sending party.
(See ‘Communications Using the Subaddress (Subaddress),’ on p. 2-34.)
Other Problems
Transmissions are slow.
Q. : Did you send documents with Image Quality set to Photo?
A. : When sending documents containing only text, set Image Quality to “Text.” (See
‘Setting the Resolution, Density, and Image Quality to Match the Original,’ on p.
2-9.)
Q. : Is the “ECM TX” or “ECM RX” Fax Function setting active?
A. : Check the “ECM TX” and “ECM RX” settings. (See ‘Specifying Whether or Not to
Use ECM Transmission,’ on p. 5-29, and ‘Specifying Whether or Not to Use ECM
for Received Documents,’ on p. 5-35.)
Documents cannot be sent overseas (error code #018).
Q. : Is a pause inserted in the telephone number?
A. : Insert a pause after the access number of the telephone company that you want
to use to perform international communication, or after the fax telephone
number of the other party, then dial the number again. (See ‘Various Dialing
Methods,’ on p. 2-19.)
Change the Long Distance setting on the Option screen if you are sending
documents using the destination list in the One-touch Speed Dialing mode.
(See ‘Detailed Settings When Storing Destinations in One-touch Speed Dialing,’
on p. 5-18.)
Index.book Page 5 Thursday, May 24, 2001 12:30 AM
To Next Page
Loading...
Need help?
General
