Sending an Original
2-7
Basic Fax Usage
2
Sending an Original
Place the original in one of the following positions, depending upon the size and type of the
original, and mode to be used.
■ Platen glass
When a feeder is not attached, place the original on the platen glass. Place the original on
the platen glass when scanning bound originals, originals of heavy or lightweight paper, or
transparencies.
■ Feeder
Place a stack of originals in the feeder, and press (Start). The machine automatically
scans them into memory. You can also automatically reverse a 2-sided original and fax
both sides.
Document Sizes Used When Sending
The size of the original is automatically detected, and the document is scanned. However, if
the output paper in the machine at the receiving end is not equal to the scanned size, the
original image is either reduced in size to match the size of the output paper at the receiving
end, or is divided into parts before being sent.
The machine cannot always detect the size of the original if it is a non-standard size or a
solid object, such as a book.
In such a case, specify the size at which you want to scan the original. (See ‘Specifying the
Scanning Size of the Original (Document Size),’ on p. 3-19.)
Index.book Page 7 Thursday, May 24, 2001 12:30 AM
To Next Page
Loading...
Need help?
General
